Industrial Floors
Stone Carpet
Polyurethane Foam
Stone Carpet
Epoxy Concrete Sealers
Epoxy Parking Decks
Epoxy Parking Decks
Broadcast Epoxy Floors
Polyurathane Floors
Broadcast Epoxy Floors
Polyurea Floors
Epoxy Floors


POLYCOLD B100 color QUARTZ binder is a two componet 100% solids (polyaspartic /aliphatic / polyurea).
The POLYCOLD 100 is a hand mix system and gives operators about 40 minutes of working time.
The POLYCOLD B100 is moisture insensitive and fast curing. The product will provide effective cover and is extremely color stable and displays excellent UV weathering characteristics.
The POLYCOLD B100 provides a tough, high gloss, abrasion resistant, uniformly smooth finish. Used as binder and top coat over color QUARTZ stone carpets systems.

Advantages & Benefits

  • Fast tack free time (5 hours), minimal down time.
  • Excellent UV,color and gloss stability.
  • 100% solids system, NO VOC's.
  • Broad range of chemical resistance.
  • Application in the field down to 0 C ambient conditions.
  • Moisture insensitive, no bubbling.

Surface Preparation

  • Concrete: Concrete must have a 28 day cure prior to application.
  • Remove any curing agent, from release materials, oils, wax, moisture or any material that may affect bonding.
  • Clean and wash to remove contaminants and maintain 5% residual moisture.
  • Perform a moisture vapor test before making the coating application on concrete.
  • Prime: Primer is always recommended to take care of voids, pot holes or bug holes and to improve adhesion properties.
  • Area must be free of dust prior to application.
  • Film may be applied using, brush or roller. Allow Primer to become tack-free before applying the coating.
  • For best results on concrete use POLYPRIME S100 and POLYPRIME EP 450 primers.


  • Prepare the surface by using grinding machine, and then apply the primer by roller.
  • At the time that you apply the primer broadcast sand 08-1,2mm.
  • This it will help at the time of the application of the quartz. Mix 10kgs of color QUARTZ 2-3mm with 0.80kgs of POLYCOLD B100 binder.
  • Use a trowel to apply it on concrete.
Full datasheet pdf-icon
© 2011 NCI. Industrial Floors  All Rights Reserved. Web Designed by Olivermind Communications
Web Developed by Istognosis LTD